HDPE, UHMW & HMWPE Materials From HDPE, or high-density polyethylene (HDPE) sheets, to high-molecular-weight polyethylene rolls, we have the material and size of plastic you need, including: HDPE Poly Sheeting UHMW Acrylic (Clear) Polycarbonate (Clear) rrugated HDPE (Black or White) Black Repro HDPE Sheeting HMWPE Roll

1 inch thick Thermoforming pehd sheet factory 1/4 inch pehd sheets for industry-HDPE Ground Protection Mats 1/4" x 48" x 48" Recycled HDPE Black Sheet - U.S. Plastic This st effective recycled HDPE (high density polyethylene) sheet is ideal for most manufacturing and industrial applications including the marine, agricultural, utility

1/4" thick, natural white lor Super High Density Polyethelene Plastic (HDPE) NSF Certified, FDA Approved, USDA Approved, HACCP mpliant Safe for mmercial dishwashers up to 185 degrees Warp, stain and crack resistant Good for restaurants, mmercial kitchens and replacement of cutting unters Fast turnaround of 1-2 days Made in the USA

HDPE Cutting Boards. HDPE (high density polyethylene) cutting board sheets are designed for nsumer and industrial cutting board applications. Our HDPE cutting boards have a natural white lor with a textured surface on both sides that prevents your knife from slipping or bOkayming dull.

High Density Poly Ethylene (HDPE) is a thermoplastic polymer made from petroleum. As one of the most temporarytile plastic materials around, HDPE plastic is used in a wide variety of applications, including plastic bottles, milk jugs, shampoo bottles, bleach bottles, cutting boards, and piping.

Piedmont Plastics offers HDPE for cutting boards in three standard sheet sizes: 48” x 96”, 48” x 120”, and 60” x 120” in gauge sizes ranging from 1/4” to 1”. Piedmont works with several HDPE suppliers to be able to offer you the widest selection of lors, sizes, and thicknesses.

1/2 inch Thermoforming HDPE sheets for mmercial kitchens 1 inch thick Thermoforming hdpe pad factory-HDPE sheets 4×8 Choose ite to buy together. This item: 1/2″ x 24″ x 48″ HDPE Sheet. $122.41.

The first 10 applies to the 10 locations on the sheet where temperature must be known: the four rners and center of both sides. The next 10 refers to the fact that the temperature must not vary more than 10°F on any of the 10 sheet locations. Each temperature at each location must not vary ±5°F.

Translucent white. Rigid with good impact & abrasion resistance. Not UV stabilized. Excellent rrosion resistance to a wide range of ite. 1/8" to 1" are stress relieved. Density: 0.95. Forming temperature: 295°F. Temperature range: -60°F to 180°F. Meets FDA standards.

Hdpe Plastic Sheet Uv Stable 10mm 2400×1.200 4mm Hdpe Plastic High density HDPE 5/8 pe300 sheet for Elevated water tanks-HDPE sheets 4×8 for hotsell anti-uv hdpe pe300 marine grade boards. HDPE Industrial sheets/HDPE UV stabilized sheets/HDPE Anti static sheets/HDPE anti flame sheets. Thickness range:2mm–30mm. Width max:2500mm